× Create a New Topic to post your report.

Incubator/hatcher room design

BigBirdGuy replied the topic: Incubator/hatcher room design

It would be helpful to know what part of the country you are located in. Depending on that, the outside environment in the incubation room may play a large role in providing the incubator with good limits in which to operate. Different people will certainly tell you what there experience has been as I will also. I try for a 21% relative humidity inside the incubator. Again depending on where you are you may be able to achieve that without concern for changing the environment in the room or you may have to. I have seen chick hatches from Natureform incubators that varied from as low as 16% to high as 25% inside the incubator.
#67

Guest replied the topic: Incubator/hatcher room design

I am currently setting up an incubation room and would be able to give any advice. I went to Natureform and couldn't get much help from them. Natureform basically wanted me to buy a new unit and pay them which wasn't in the budget. What questions are you needing answered?
#64

wruvruio replied the topic: Incubator/hatcher room design

Since you are using a NatureForm incubator, it is recommended that you review and consider implementing the recommendations available online, in NatureForm equipment operation manuals, or calling Natureform directly for all the details of setting up an incubator room to accomodate the correct operations of Natureform equipment.
#21

BigBirdGuy replied the topic: Incubator/hatcher room design

This person is not a member of the AOA. To the guest, please be advised that there are many different situations regarding incubation. I will leave your topic here in the open forum for a short while so you can interact to any replies before it is moved to the Hatchery Category where you will be able to continue to view the replies.
#15

Guest created the topic: Incubator/hatcher room design

I'm getting ready to build a incubator room for next year. Can someone please tell me how I should design it and all the details that go along with it. I believe the room temperature and humidity have to be maintained outside the incubator as well as inside. I will be using a NatureForm Nom45 . Please provide any suggestions. Thanks...
#10
Moderators: BigBirdGuy